Technical data:
Parameters | Value | |
L118.41.100 | L128.41.100 | |
Dimensions of initial roll - outside diameter, mm - inside diameter, mm - strip thickness, mm - strip width, mm - max. mass of roll, kg |
1000 - 1800 470 - 780 0,5 - 4 750 - 1600 26000 |
|
ultimate strength of material to be cut, MPa, max | 450 | |
Speed of cutting, m/min | 30 - 90 | |
Number of simultaneous cuts at strip thickness: - up to 1 mm, cuts - up to 4 mm, cuts |
23 6 |
|
Min. strip width of rolls to be made, mm | 30 | |
Number of rectilinear cards to be cut off, pcs/min, when cutting with one (two) shears with length of 1000 mm | 32 (43) | |
Max. height of card stack, mm | 500 | |
Max. mass of card stack, kg | 5000 | |
Total power of electromotors, kW | 354 | 206 |
Overall dimensions of line, mm, length x width x height above the floor lever. | 23624x14710x3100 | 35600x9910x3300 |
Mass of line, kg | 140000 |
Technological cards (workpieces) of rectilinear, rhomb and trapezoidal forms (dimensions in mm)
To improve the consumers' parameters of equipment OJSC "Donpressmash" reserves the right to introduce technical and design amendments. |
![]() |
![]() |
![]() ![]() |
Copyright © 2000 Donpressmash. All Rights Reserved |