Technical data
| Parameters | �.2.30.01 | �.2.26.02 |
| Nominal effort,kN | 1000 | 400 |
| Max. dimensions 镳�  500 MPa:- round (diameter), mm - square (side), mm - angle, mm - strip (thikness x width), mm - I-beam, size - channel, size hole to be punched, not over: - hole diameter, mm - thickness of material, mm |
56 |
32 28 80x80x8 10x300; 8x350 - - 30 8 |
| Piston stroke, mm | 0...100 | 50 |
| Frequency of ram strokes, min-1 - at full value of stroke - at stroke value of 20 mm |
15 60 |
9 18 |
| Distance from hydrocylinder axle to frame, mm | 510 | 200 |
| Main drive power, KW | 11 | 4 |
| Length of press - and - -shears. mm | 2625 | 1235 |
| Width, mm Width with rolling table and stop, mm |
1500 4800 |
600 - |
| Height, mm | 2775 | 1560 |
| Mass, kg Mass with rolling table and stop, kg |
- 5200 |
1500 - |
| To improve the consumers' parameters of equipment OJSC "Donpressmash" reserves the right to introduce technical and design amendments. |
 |
 |
  |
Copyright © 2000 Donpressmash. All Rights Reserved |